click to enlarge
STROBE SECURITY SYSTEM
The Strobe Security System is a complete wireless
security system for your home or office which you can install in minutes.
This system provides you and your family with the same security and peace
of mind found in professionally installed security systems but without
the high cost and expensive monitoring fees.
It monitors
your home using a motion sensor and two glass break sensors that can also
be used as magnetic contact sensors. The motion detector can detect motion
from up to 30 feet away. If not disarmed by the owner using one of the
two included remote controls, it will respond with an ear piercing
alarm and flashing light. A switch on the side of the light allows it
to remain on for emergency lighting during a power outage. The glass break
sensors will detect the vibration caused from someone attempting to break
in through a window. You can adjust it's sensitivity, turn it off, or
cause the alarm to sound instantly or after a delay. You can also
plug a magnetic contact sensor into the side of the glass break sensor
to detect the opening of a door or window. This dual level of security
is very important in protecting sliding glass doors. A burglar will be
detected if he attempts to break the glass or if he attempts to pry the
door open.
The system includes
a wireless, external siren which can be mounted on the outside your home
or business. If the motion detector, the glass break sensor, or the magnetic
contact detects an intruder it will send a signal (RF) to the external
siren which will also respond with an ear piercing siren and flashing
light. With siren sounding and lights flashing both inside and outside
your home or business, the burglar will be scared off and help will come
from neighbors.
The system also
includes a lightweight remote panic alarm that can be attached to a keychain
or worn around the neck. This can be used by an elderly person who has
fallen down to get help from neighbors.
The complete
system includes 1 motion detector with alarm and strobe, 2 remote controls,
2 glass break sensors and/or magnetic contacts, 1 external siren with
alarm and strobe, 1 panic remote with neck cord, 2 alarm system warning
decals, and adjustable mounting brackets and screws for the motion detector
and external siren. Additional remotes can be purchased separately: see
item RMC318.
|